diff --git a/COPYING b/COPYING
index b3c2d15bb6812bba7c40cc4fc2671a882f22482a..d60c31a97a544b53039088d14fe9114583c0efc3 100644
--- a/COPYING
+++ b/COPYING
@@ -2,7 +2,7 @@
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -55,8 +55,8 @@ patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
-
- GNU GENERAL PUBLIC LICENSE
+
+ GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
@@ -110,7 +110,7 @@ above, provided that you also meet all of these conditions:
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
-
+
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
@@ -168,7 +168,7 @@ access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
-
+
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
@@ -225,7 +225,7 @@ impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
-
+
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
@@ -278,7 +278,7 @@ PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
-
+
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
@@ -313,7 +313,7 @@ Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
- Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
diff --git a/INSTALL b/INSTALL
index d1f493f176931763b8dce2c9fb1af961f2f8c068..54caf7c190f28df0279ade5fee3d43b108480a14 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,15 +1,229 @@
-Installation
-============
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
-Type the following:
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
- ./configure
- make
- make install
+Basic Installation
+==================
-The default install locations are /usr/local/bin and /usr/local/share.
+ These are generic installation instructions.
-If you want to change the install location, use configure's --prefix option
-e.g. ./configure --prefix=/usr will install into /usr/bin and /usr/share.
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
-If you want to enable debugging output use the --enable-debug option.
diff --git a/autogen.sh b/autogen.sh
index 4ee79fa3abc59ce96ee915c04ee201c037c9022a..4c14e402b727c8a66bbe0b1f40d8cd141fde772b 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -133,7 +133,7 @@ do
autoheader
fi
echo "Running automake --gnu $am_opt ..."
- automake --add-missing --gnu $am_opt
+ automake --add-missing --gnu --force --copy $am_opt
echo "Running autoconf ..."
autoconf
)
diff --git a/config.guess b/config.guess
index 5145e35717991118e42fa7b479e0b7926074e79d..9b1384be4b12624beff8bf1a08b3eec9b0b7b5fe 100755
--- a/config.guess
+++ b/config.guess
@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002 Free Software Foundation, Inc.
-timestamp='2002-10-21'
+timestamp='2002-11-30'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -178,7 +178,18 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
;;
esac
# The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
@@ -449,7 +460,7 @@ EOF
Motorola:*:4.3:PL8-*)
echo powerpc-harris-powermax
exit 0 ;;
- Night_Hawk:*:*:PowerMAX_OS)
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
echo powerpc-harris-powermax
exit 0 ;;
Night_Hawk:Power_UNIX:*:*)
@@ -769,13 +780,16 @@ EOF
echo ${UNAME_MACHINE}-pc-pw32
exit 0 ;;
x86:Interix*:3*)
- echo i386-pc-interix3
+ echo i586-pc-interix3
+ exit 0 ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
exit 0 ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
+ echo i586-pc-interix
exit 0 ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
@@ -819,7 +833,27 @@ EOF
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
rm -f $dummy.c && rmdir $tmpdir
- test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ rm -f $dummy.c && rmdir $tmpdir
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
;;
ppc:Linux:*:*)
echo powerpc-unknown-linux-gnu
@@ -932,6 +966,23 @@ EOF
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit 0 ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit 0 ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit 0 ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit 0 ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -966,9 +1017,6 @@ EOF
echo ${UNAME_MACHINE}-pc-sysv32
fi
exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
@@ -995,9 +1043,12 @@ EOF
mc68k:UNIX:SYSTEM5:3.51m)
echo m68k-convergent-sysv
exit 0 ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
+ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1014,9 +1065,6 @@ EOF
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
@@ -1134,11 +1182,6 @@ EOF
fi
echo ${UNAME_MACHINE}-unknown-plan9
exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
exit 0 ;;
@@ -1157,12 +1200,6 @@ EOF
*:ITS:*:*)
echo pdp10-unknown-its
exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/config.sub b/config.sub
index 1dea9b79d5500e4e629a7f841d4a969d7b8412c6..f0675aa6b781c1f3557e5fc2dcb319becfddd60c 100755
--- a/config.sub
+++ b/config.sub
@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002 Free Software Foundation, Inc.
-timestamp='2002-09-05'
+timestamp='2002-11-30'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -118,7 +118,7 @@ esac
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
+ nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -977,10 +977,6 @@ case $basic_machine in
basic_machine=hppa1.1-winbond
os=-proelf
;;
- windows32)
- basic_machine=i386-pc
- os=-windows32-msvcrt
- ;;
xps | xps100)
basic_machine=xps100-honeywell
;;
@@ -1113,11 +1109,12 @@ case $os in
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*)
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1129,8 +1126,10 @@ case $os in
;;
esac
;;
+ -nto-qnx*)
+ ;;
-nto*)
- os=-nto-qnx
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
diff --git a/depcomp b/depcomp
index 3480ce4e96d431f9d70162fd1cd79366c714996b..807b991f4a895431dfc232112e77b0ae7e3d5017 100755
--- a/depcomp
+++ b/depcomp
@@ -209,16 +209,20 @@ aix)
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- base=`echo "$object" | sed -e 's/\.o$//' -e 's/\.lo$//'`
- tmpdepfile1="$base.o.d"
- tmpdepfile2="$base.d"
if test "$libtool" = yes; then
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
"$@" -MD
fi
@@ -250,34 +254,40 @@ tru64)
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- test -z "$dashmflag" && dashmflag=-M
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*) # this is libtool, let us make it quiet
- for arg
- do # cycle over the arguments
- case "$arg" in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
+ # always write the proprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'. We will use -o /dev/null later,
+ # however we can't do the remplacement now because
+ # `-o $object' might simply not be used
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
;;
esac
- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
@@ -295,33 +305,28 @@ dashXmstdout)
;;
makedepend)
+ "$@" || exit $?
# X makedepend
- (
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in no)
- set ""; shift
- cleared=yes
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ -*)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
@@ -334,35 +339,39 @@ makedepend)
cpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
+ # always write the proprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
;;
esac
- "$@" -E |
+ done
+
+ "$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -374,47 +383,25 @@ msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
- *)
+ *)
set fnord "$@" "$arg"
shift
shift
;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
diff --git a/install-sh b/install-sh
index e9de23842dcd44d2953129c866b1ad25f7e1f1d9..36f96f3e033cfaeefc092147d99d92f78e030d12 100755
--- a/install-sh
+++ b/install-sh
@@ -56,7 +56,7 @@ dir_arg=""
while [ x"$1" != x ]; do
case $1 in
- -c) instcmd="$cpprog"
+ -c) instcmd=$cpprog
shift
continue;;
@@ -79,7 +79,7 @@ while [ x"$1" != x ]; do
shift
continue;;
- -s) stripcmd="$stripprog"
+ -s) stripcmd=$stripprog
shift
continue;;
@@ -106,128 +106,132 @@ done
if [ x"$src" = x ]
then
- echo "install: no input file specified"
+ echo "$0: no input file specified" >&2
exit 1
else
- true
+ :
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
-
- if [ -d $dst ]; then
+
+ if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
- instcmd=mkdir
+ instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
+# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
- if [ -f $src -o -d $src ]
+ if [ -f "$src" ] || [ -d "$src" ]
then
- true
+ :
else
- echo "install: $src does not exist"
+ echo "$0: $src does not exist" >&2
exit 1
fi
-
+
if [ x"$dst" = x ]
then
- echo "install: no destination specified"
+ echo "$0: no destination specified" >&2
exit 1
else
- true
+ :
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
- if [ -d $dst ]
+ if [ -d "$dst" ]
then
- dst="$dst"/`basename $src`
+ dst=$dst/`basename "$src"`
else
- true
+ :
fi
fi
## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
+defaultIFS='
+ '
+IFS="${IFS-$defaultIFS}"
-oIFS="${IFS}"
+oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
+ pathcomp=$pathcomp$1
shift
- if [ ! -d "${pathcomp}" ] ;
+ if [ ! -d "$pathcomp" ] ;
then
- $mkdirprog "${pathcomp}"
+ $mkdirprog "$pathcomp"
else
- true
+ :
fi
- pathcomp="${pathcomp}/"
+ pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
- $doit $instcmd $dst &&
+ $doit $instcmd "$dst" &&
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
- if [ x"$transformarg" = x ]
+ if [ x"$transformarg" = x ]
then
- dstfile=`basename $dst`
+ dstfile=`basename "$dst"`
else
- dstfile=`basename $dst $transformbasename |
+ dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
- if [ x"$dstfile" = x ]
+ if [ x"$dstfile" = x ]
then
- dstfile=`basename $dst`
+ dstfile=`basename "$dst"`
else
- true
+ :
fi
-# Make a temp file name in the proper directory.
+# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/#inst.$$#
+ rmtmp=$dstdir/#rm.$$#
-# Move or copy the file name to the temp name
+# Trap to clean up temp files at exit.
- $doit $instcmd $src $dsttmp &&
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
- trap "rm -f ${dsttmp}" 0 &&
+# Move or copy the file name to the temp name
+
+ $doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
@@ -235,17 +239,38 @@ else
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location. We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons. In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+ if [ -f "$dstdir/$dstfile" ]
+ then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+ {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+} &&
# Now rename the file to the real destination.
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
+# The final little trick to "correctly" pass the exit status to the exit trap.
-exit 0
+{
+ (exit 0); exit
+}
diff --git a/missing b/missing
index dd583709f535918128e0f8d3b6a4fddf64c87cec..6a37006e8f0a69ddbf5b383c882beb60cbe04d12 100755
--- a/missing
+++ b/missing
@@ -1,6 +1,6 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -293,23 +293,23 @@ WARNING: \`$1' is missing on your system. You should only need it if
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
- gnutar ${1+"$@"} && exit 0
+ gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
- gtar ${1+"$@"} && exit 0
+ gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" ${1+"$@"} && exit 0
+ tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" ${1+"$@"} && exit 0
+ tar "$firstarg" "$@" && exit 0
;;
esac
fi
diff --git a/mkinstalldirs b/mkinstalldirs
index 6b3b5fc5d4d34f3065bdad528dfeb7604dd01a8d..d2d5f21b611235316317197d3a32c2dff5897a6f 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -4,37 +4,108 @@
# Created: 1993-05-16
# Public domain
-# $Id$
-
errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage" 1>&2
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
for file
do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+case $dirmode in
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
+ mkdir "$pathcomp" || lasterr=$?
- mkdir "$pathcomp" || lasterr=$?
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
- fi
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
- pathcomp="$pathcomp/"
- done
+ pathcomp="$pathcomp/"
+ done
done
exit $errstatus
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
# mkinstalldirs ends here