xfce4-panel issueshttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues2022-04-12T21:23:08Zhttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues/130Panel anchored to screen edge moves to invisible area when connecting externa...2022-04-12T21:23:08ZBugzilla MigrationPanel anchored to screen edge moves to invisible area when connecting external monitor of larger resolution## Submitted by LAMB
Assigned to **Nick Schermer**
**[Link to original bug (#12152)](https://bugzilla.xfce.org/show_bug.cgi?id=12152)**
## Description
Created attachment 6419
screenshots of panel placement, configuration
Setup in...## Submitted by LAMB
Assigned to **Nick Schermer**
**[Link to original bug (#12152)](https://bugzilla.xfce.org/show_bug.cgi?id=12152)**
## Description
Created attachment 6419
screenshots of panel placement, configuration
Setup information:
* Lenovo laptop with screen resolution of (LVDS1) = 1366x768
* Debian 8
* XFCE 4.12
My XFCE desktop has panels anchored to the top and bottom edges of the screen, with the configuration of the bottom panel as described in attachment file as panel.png.
When plugging an external monitor that has the same or lower vertical resolution (eg.: 1024x768) the placement and anchoring of the panel is respected, appearing as the red bar in attachment as arandr1.png.
When plugging an external monitor that has a higher vertical, such as 1600x1024:
** What I observe**
The viewport bound of the entire desktop extends to a vertical of height 1024, and the bottom panel becomes anchored to this edge instead of edge of screen, leaving it inside an invisible area and ubusableedge instead of the edge of the monitor view, thus being locked in an invisible region and becoming unusable, as in aranrd2.png
** What I expect**
The panel remains anchored to the edge of the screen, where it remains useful.
**Attachment 6419**, "screenshots of panel placement, configuration":
[panebug.zip](/uploads/b4df1dce091ddec7a741a77e76557e6b/panebug.zip)
Version: 4.12.0https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/133Open first launcher in list by middle click in groped button2022-04-06T09:49:26ZBugzilla MigrationOpen first launcher in list by middle click in groped button## Submitted by Yan Pas
Assigned to **Nick Schermer**
**[Link to original bug (#12192)](https://bugzilla.xfce.org/show_bug.cgi?id=12192)**
## Description
If the launcher is set to group mode (list of apps pops-up on click) - then ...## Submitted by Yan Pas
Assigned to **Nick Schermer**
**[Link to original bug (#12192)](https://bugzilla.xfce.org/show_bug.cgi?id=12192)**
## Description
If the launcher is set to group mode (list of apps pops-up on click) - then it would be useful to open the first app in list if I middle click launcher.
Version: 4.12.0https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/134Invisible style2022-04-04T21:17:02ZBugzilla MigrationInvisible style## Submitted by Khazar
Assigned to **Nick Schermer**
**[Link to original bug (#12202)](https://bugzilla.xfce.org/show_bug.cgi?id=12202)**
## Description
Invisible style may be nice.
Here is my panel setting:
Xfdashboard
-Separat...## Submitted by Khazar
Assigned to **Nick Schermer**
**[Link to original bug (#12202)](https://bugzilla.xfce.org/show_bug.cgi?id=12202)**
## Description
Invisible style may be nice.
Here is my panel setting:
Xfdashboard
-Separator Invisible (expanded)
CPU Graph
CPU Frequency Monitor
-Separator Transparent (expanded)
Weather Update
Clock
-Separator Invisible (expanded)
Show Desktop
Currently, I use two panels for plugin Xfdashboard and plugin Show Desktop.
Version: Unspecifiedhttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues/135Make it so that fixed vs auto-shrinking buttons is a config option2022-04-06T10:06:38ZBugzilla MigrationMake it so that fixed vs auto-shrinking buttons is a config option## Submitted by Raymond Jennings
**[Link to original bug (#12205)](https://bugzilla.xfce.org/show_bug.cgi?id=12205)**
## Description
Related: https://bugzilla.xfce.org/show_bug.cgi?id=5045
Related: http://docs.xfce.org/xfce/xfce4...## Submitted by Raymond Jennings
**[Link to original bug (#12205)](https://bugzilla.xfce.org/show_bug.cgi?id=12205)**
## Description
Related: https://bugzilla.xfce.org/show_bug.cgi?id=5045
Related: http://docs.xfce.org/xfce/xfce4-panel/tasklist
Make it so that window buttons can be told to automatically shrink if they don't all fit on the panel.
**Attachment 6453**, "the config dialog I would like this option added to":
![xfce-buttons](/uploads/424436c1fa6f4da674c346ed72e50b3f/xfce-buttons.png)
Version: Unspecifiedhttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues/150Panel items are not displayed arbitrarily2022-04-06T10:29:02ZBugzilla MigrationPanel items are not displayed arbitrarily## Submitted by Martin Unzner
Assigned to **Nick Schermer**
**[Link to original bug (#12582)](https://bugzilla.xfce.org/show_bug.cgi?id=12582)**
## Description
Panel items listed in preferences but not rendered. This bug is recurr...## Submitted by Martin Unzner
Assigned to **Nick Schermer**
**[Link to original bug (#12582)](https://bugzilla.xfce.org/show_bug.cgi?id=12582)**
## Description
Panel items listed in preferences but not rendered. This bug is recurring regularly, but not easily reproducible. Are there any log files / debug flags that could help track down this issue? Thanks!
Version: 4.12.0https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/183Panel disappears at random, with multiple restoration panels.2021-02-07T02:02:56ZBugzilla MigrationPanel disappears at random, with multiple restoration panels.## Submitted by MR ZenWiz
Assigned to **Nick Schermer**
**[Link to original bug (#14146)](https://bugzilla.xfce.org/show_bug.cgi?id=14146)**
## Description
Created attachment 7522
Error popup when panel disappears
I run Xubuntu 1...## Submitted by MR ZenWiz
Assigned to **Nick Schermer**
**[Link to original bug (#14146)](https://bugzilla.xfce.org/show_bug.cgi?id=14146)**
## Description
Created attachment 7522
Error popup when panel disappears
I run Xubuntu 16.04 LTS on at least four computers - my home desktop, my personal laptop, a VM on my work computer and my closest friend's laptop.
On that last one (only), this happens frequently. The panel disappears and one (usually several - I've seen as many as 8) window pops up saying that no panel can be found and asking if we want to restart the panel. See the first and second attached images.
When we click on "Execute", another panel pops up that says "Modifying the panel is not allowed." First of all, I don't know what that means, and the included text is no help (also see the third attached image). It talks about being in kiosk mode. This is a separate bug because in looking through the information available online, particularly the XFCE4 page about kiosk mode, it doesn't bother to say that that means. I searched the whole system and there are no config files on the entire system that have kiosk in their name or contents:
13:43 [admar@mar-HP8740w:/etc/xdg] $ find . -type f -exec grep -i kiosk /dev/null {} \;
13:44 [admar@mar-HP8740w:/etc/xdg] $
Thus, I have not found the setting that is causing this problem so I can reset it.
Neither my friend nor I have set kiosk mode on her computer (I'm still not sure what the advantage to this is and thus would not use it). However, I also have not found a good solution for how to turn it off. For the record, I do not believe there should be ANY settings on MY computer that I can't control, particularly if there are restrictions on ways it behaves. This is less of a problem when there is clear user-oriented documentation - I have not found any here yet.
In any case, the panel should not be disappearing. If it does, it should be able to recover without running me through obstructive BS like this. JMNHSO.
I've been a software developer for over 38 years, 31 of them in UNIX/Linux. I've been using Linux systems at home continuously for over 10 years, in Xubuntu since 2021, and I still find myself amazed at all the new obstructive features that keep slipping in without fanfare - maybe that's just my problem.
The panels are necessary for the smooth operation of a user system. Having this kind of obstructive behavior on such a necessary feature is not acceptable to me.
I hope this can be fixed soon, or the documentation improved to make it clear what this is and how to use and disable it.
**Attachment 7522**, "Error popup when panel disappears":
![NoPanel-1](/uploads/fa592a24a095bea6896081680440eea2/NoPanel-1.png)
Version: 4.12.1https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/198Top panel will freeze if close windows very fast.2022-04-05T07:01:35ZBugzilla MigrationTop panel will freeze if close windows very fast.## Submitted by Haomin Gui
Assigned to **Nick Schermer**
**[Link to original bug (#14840)](https://bugzilla.xfce.org/show_bug.cgi?id=14840)**
## Description
Top panel will freeze if close windows very fast. Cannot select windows t...## Submitted by Haomin Gui
Assigned to **Nick Schermer**
**[Link to original bug (#14840)](https://bugzilla.xfce.org/show_bug.cgi?id=14840)**
## Description
Top panel will freeze if close windows very fast. Cannot select windows tab, or any buttons on the top panel.
Version: 4.13.3https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/243Notification panel plugin loses qt5 icons on panel restart2022-08-25T11:40:39ZBugzilla MigrationNotification panel plugin loses qt5 icons on panel restart## Submitted by Nikita Zlobin
Assigned to **Xfce Bug Triage**
**[Link to original bug (#15694)](https://bugzilla.xfce.org/show_bug.cgi?id=15694)**
## Description
When panel restarts, tray icons, created by qt5 applications, don't ...## Submitted by Nikita Zlobin
Assigned to **Xfce Bug Triage**
**[Link to original bug (#15694)](https://bugzilla.xfce.org/show_bug.cgi?id=15694)**
## Description
When panel restarts, tray icons, created by qt5 applications, don't appear in notification area.
Only application restart solves problem until next panel restart.
I checked following applications (all are affected):
keepassx, qsynth, qjackctl, cadence, clementine, vlc
However, starting panel from terminal, I don't get any errors,
like in https://bugzilla.xfce.org/show_bug.cgi?id=11522
Version: 4.13.6https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/266Changing the "command" field of any launcher crashes panels2022-04-06T18:18:27ZBugzilla MigrationChanging the "command" field of any launcher crashes panels## Submitted by LIAR
Assigned to **Xfce Bug Triage**
**[Link to original bug (#16010)](https://bugzilla.xfce.org/show_bug.cgi?id=16010)**
## Description
Created attachment 9080
Video demonstration of panel crashing when editing th...## Submitted by LIAR
Assigned to **Xfce Bug Triage**
**[Link to original bug (#16010)](https://bugzilla.xfce.org/show_bug.cgi?id=16010)**
## Description
Created attachment 9080
Video demonstration of panel crashing when editing the command filed of a launcher
Settings :
- XFCE 4.12
- Dual monitors (with duplicated top panels & bottom dock, as there is currently no other possibility to replicate panels on several monitors)
- Need to be able to switch
What I do:
- Right click on a launcher in bottom dock + Properties
- Click On "edit" icon
- Change the "command" field
- Save
What happens:
- all panels get closed and reloaded
- (but changes to launcher are saved)
What should happen
- panels should not crash
- changes should still be saved
**Attachment 9080**, "Video demonstration of panel crashing when editing the command filed of a launcher":
[2019-10-04_10-37-11.flv](/uploads/7fa1a9830695c6d8752838093974b775/2019-10-04_10-37-11.flv)
Version: 4.12.0https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/306[Request] Please allow smaller icons for show desktop plugin.2022-04-06T22:04:56Zdroided4u[Request] Please allow smaller icons for show desktop plugin.Because of the square icon preset, it's impossible to have a slim show desktop icon. I tried all workarounds I can think of, but it just doesn't work. At best only the icon changes, the space it occupies is always the same.Because of the square icon preset, it's impossible to have a slim show desktop icon. I tried all workarounds I can think of, but it just doesn't work. At best only the icon changes, the space it occupies is always the same.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/315Feature Request: Top panel flip button2021-02-08T04:08:16Z49studebakerFeature Request: Top panel flip buttonCould you put a button on the right end of the top panel, that would flip over the top panel when the button is clicked? Icons, widgets, etc could be put on the back side of the top panel.Could you put a button on the right end of the top panel, that would flip over the top panel when the button is clicked? Icons, widgets, etc could be put on the back side of the top panel.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/353Pop up Terminal42021-02-08T05:04:24ZDominique BaudelinPop up Terminal4Hi,
The Xubuntu 20.04 Release displays a terminal for two or three seconds after the lightdm session.
Then the software system resumes executing in a normal manner.
I would like the pop up terminal to go away.
Thanks very much for your...Hi,
The Xubuntu 20.04 Release displays a terminal for two or three seconds after the lightdm session.
Then the software system resumes executing in a normal manner.
I would like the pop up terminal to go away.
Thanks very much for your help,
D.B.
N.B.:
$ uname -a
Linux SATELLITE-C70D-B 5.4.0-48-generic #52-Ubuntu SMP Thu Sep 10 10:58:49 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Hardware:
Toshiba SATELLITE-C70D-B
[dmesg-xfce4-20.04.pdf](/uploads/61960d659e680b839560902809f67617/dmesg-xfce4-20.04.pdf)[xfce4-2004-pstree.pdf](/uploads/841eccee75d9539696f8625c3f7b2291/xfce4-2004-pstree.pdf)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/355In dual monitor, xfce-panel at border never reveals with autohide always2022-07-11T08:35:39ZikiddoIn dual monitor, xfce-panel at border never reveals with autohide alwaysConditions:
1. Dual monitor layout.
2. Xfce-panel is positioned on the edge that borders the second display [See Note].
3. Xfce-panel has auto-hide set to always
Problem:
Moving the cursor to the edge of the display does not reveal the ...Conditions:
1. Dual monitor layout.
2. Xfce-panel is positioned on the edge that borders the second display [See Note].
3. Xfce-panel has auto-hide set to always
Problem:
Moving the cursor to the edge of the display does not reveal the panel.
Things I've tried:
It doesn't matter whether the panel is a) oriented horizontally, positioned at top/bottom and display layout is two monitors above each other, or b) oriented vertically, positioned at side and display layout is two monitors besides each other.
Note:
This can be achieved by selecting the right display/monitor as output, or by selecting automatic output and keeping span monitors disabled.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/462it won't woek2021-04-28T09:40:38Zoof robloxit won't woekit says no data it won't workit says no data it won't workhttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues/473Window Button blinks despite being active window already2022-07-13T13:49:03ZhaarpWindow Button blinks despite being active window alreadyI'm working with applications that pop up dialog windows (which won't appear in the window button list). Wine applications especially. Frequently, when the dialog window is closed again, the application's button in the window button list...I'm working with applications that pop up dialog windows (which won't appear in the window button list). Wine applications especially. Frequently, when the dialog window is closed again, the application's button in the window button list starts blinking. This is despite the fact that the application already is active and has focus.
This smells like a bug. I don't think the currently active/focused window's button should be able to blink. It's unnecessarily distracting, and there's no intuitive way to stop it when it happens.
To make it stop, one has to focus a different window and then the application again.
Cheers!https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/515Many xfce4 components use a lot of memory. Up to the point where multiple of ...2021-09-27T18:57:42ZMarco WeidnerMany xfce4 components use a lot of memory. Up to the point where multiple of them use up to 1.5 GB each.My system has 32 GB Ram. 4 GB of it are reserved for the graphics. Sure I use multiple browsers and many tabs, but 32 GB that are almost fully utilized ?
I have observed this for months. (no logs, manually in task manager).
Finally I no...My system has 32 GB Ram. 4 GB of it are reserved for the graphics. Sure I use multiple browsers and many tabs, but 32 GB that are almost fully utilized ?
I have observed this for months. (no logs, manually in task manager).
Finally I noticed this:
- xfce4-panel 1.2 GB
- xfce libwearther.so 1.2 GB (2 times, because it is running 2 times)
- xfce libsystemload.so 1.2GB
- xfce libsystray.so 1.2 GB
Unfortunately I didn't take a screenshot there, but I waited a bit and took one when it wasn't quite sooo bad, but still. That's too much or (picture attached) ?
My system almost always runs through. The memory consumption of these XFCE files fluctuates. So it decreases in between. But I have no idea why. I can't find any connection.
If you want me to call any logs or something like that, I'll gladly do it.
```
$ xfce4-panel --version
xfce4-panel 4.16.3 (Xfce 4.16)
$ uname -r
5.10.49-1-MANJARO
```
![xfce4_memory_usage_July_31_2021](/uploads/9a137d74bfe37e224a94b9251bef7beb/xfce4_memory_usage_July_31_2021.jpg)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/535PID: 19352022-04-04T14:43:08ZbrokeraPID: 1935===================================================================
Info
===================================================================
```
PID: 1935 (xfce4-p...===================================================================
Info
===================================================================
```
PID: 1935 (xfce4-panel)
UID: 1000 (andypc)
GID: 1000 (andypc)
Signal: 6 (ABRT)
Timestamp: Wed 2021-11-10 09:26:39 EET (1 day 23h ago)
Command Line: xfce4-panel
Executable: /usr/bin/xfce4-panel
Control Group: /user.slice/user-1000.slice/session-c2.scope
Unit: session-c2.scope
Slice: user-1000.slice
Session: c2
Owner UID: 1000 (andypc)
Boot ID: f4d5740d1fc042af96f3291e3c2604b6
Machine ID: 2b04f8cbdab74a60bdc5d27b5435a5b2
Hostname: andypc
Storage: /var/lib/systemd/coredump/core.xfce4-panel.1000.f4d5740d1fc042af96f3291e3c2604b6.1935.1636529199000000000000.lz4
Message: Process 1935 (xfce4-panel) of user 1000 dumped core.
Stack trace of thread 1935:
#0 0x00007f068647318b __GI_raise (libc.so.6 + 0x4618b)
#1 0x00007f068645292e __GI_abort (libc.so.6 + 0x2592e)
#2 0x00007f068678bb43 n/a (libglib-2.0.so.0 + 0x1db43)
#3 0x00007f06867e8cef g_assertion_message_expr (libglib-2.0.so.0 + 0x7acef)
#4 0x00007f068770fb7e n/a (libxfce4panel-2.0.so.4 + 0xab7e)
#5 0x00007f06868b0d0e g_object_unref (libgobject-2.0.so.0 + 0x19d0e)
#6 0x00007f06868d64c8 g_value_unset (libgobject-2.0.so.0 + 0x3f4c8)
#7 0x00007f06868ca61d g_signal_emit_valist (libgobject-2.0.so.0 + 0x3361d)
#8 0x00007f06868cb0f3 g_signal_emit (libgobject-2.0.so.0 + 0x340f3)
#9 0x00007f06877121d0 n/a (libxfce4panel-2.0.so.4 + 0xd1d0)
#10 0x00007f06868ab802 g_closure_invoke (libgobject-2.0.so.0 + 0x14802)
#11 0x00007f06868bf814 n/a (libgobject-2.0.so.0 + 0x28814)
#12 0x00007f06868cabbe g_signal_emit_valist (libgobject-2.0.so.0 + 0x33bbe)
#13 0x00007f06868cb0f3 g_signal_emit (libgobject-2.0.so.0 + 0x340f3)
#14 0x00007f068710fab2 gtk_widget_activate (libgtk-3.so.0 + 0x394ab2)
#15 0x00007f0686fdda36 gtk_menu_shell_activate_item (libgtk-3.so.0 + 0x262a36)
#16 0x00007f0686fddcc3 n/a (libgtk-3.so.0 + 0x262cc3)
#17 0x00007f06871625ef n/a (libgtk-3.so.0 + 0x3e75ef)
#18 0x00007f06868aba56 n/a (libgobject-2.0.so.0 + 0x14a56)
#19 0x00007f06868c9df1 g_signal_emit_valist (libgobject-2.0.so.0 + 0x32df1)
#20 0x00007f06868cb0f3 g_signal_emit (libgobject-2.0.so.0 + 0x340f3)
#21 0x00007f068710cc23 n/a (libgtk-3.so.0 + 0x391c23)
#22 0x00007f0686fc8128 n/a (libgtk-3.so.0 + 0x24d128)
#23 0x00007f0686fca3db gtk_main_do_event (libgtk-3.so.0 + 0x24f3db)
#24 0x00007f0686cb2f79 n/a (libgdk-3.so.0 + 0x3cf79)
#25 0x00007f0686ce6106 n/a (libgdk-3.so.0 + 0x70106)
#26 0x00007f06867c017d g_main_context_dispatch (libglib-2.0.so.0 + 0x5217d)
#27 0x00007f06867c0400 n/a (libglib-2.0.so.0 + 0x52400)
#28 0x00007f06867c06f3 g_main_loop_run (libglib-2.0.so.0 + 0x526f3)
#29 0x00007f0686fc937d gtk_main (libgtk-3.so.0 + 0x24e37d)
#30 0x00005559b75fe9d7 main (xfce4-panel + 0x179d7)
#31 0x00007f06864540b3 __libc_start_main (libc.so.6 + 0x270b3)
#32 0x00005559b75fefae _start (xfce4-panel + 0x17fae)
Stack trace of thread 1937:
#0 0x00007f0686542aff __GI___poll (libc.so.6 + 0x115aff)
#1 0x00007f06867c036e n/a (libglib-2.0.so.0 + 0x5236e)
#2 0x00007f06867c06f3 g_main_loop_run (libglib-2.0.so.0 + 0x526f3)
#3 0x00007f0686a15f8a n/a (libgio-2.0.so.0 + 0x11ef8a)
#4 0x00007f06867e9ad1 n/a (libglib-2.0.so.0 + 0x7bad1)
#5 0x00007f06863e3609 start_thread (libpthread.so.0 + 0x9609)
#6 0x00007f068654f293 __clone (libc.so.6 + 0x122293)
Stack trace of thread 1936:
#0 0x00007f0686542aff __GI___poll (libc.so.6 + 0x115aff)
#1 0x00007f06867c036e n/a (libglib-2.0.so.0 + 0x5236e)
#2 0x00007f06867c04a3 g_main_context_iteration (libglib-2.0.so.0 + 0x524a3)
#3 0x00007f06867c04f1 n/a (libglib-2.0.so.0 + 0x524f1)
#4 0x00007f06867e9ad1 n/a (libglib-2.0.so.0 + 0x7bad1)
#5 0x00007f06863e3609 start_thread (libpthread.so.0 + 0x9609)
#6 0x00007f068654f293 __clone (libc.so.6 + 0x122293)
```
===================================================================
GDB Log
===================================================================
```
[New LWP 1935]
[New LWP 1937]
[New LWP 1936]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `xfce4-panel'.
Program terminated with signal SIGABRT, Aborted.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f0685436a80 (LWP 1935))]
```
===================================================================
GDB Backtrace
===================================================================
```
[New LWP 1935]
[New LWP 1937]
[New LWP 1936]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `xfce4-panel'.
Program terminated with signal SIGABRT, Aborted.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f0685436a80 (LWP 1935))]
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f068645292e in __GI_abort () at abort.c:100
#2 0x00007f068678bb43 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#3 0x00007f06867e8cef in g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#4 0x00007f068770fb7e in ?? () from /lib/x86_64-linux-gnu/libxfce4panel-2.0.so.4
#5 0x00007f06868b0d0e in g_object_unref () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#6 0x00007f06868d64c8 in g_value_unset () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#7 0x00007f06868ca61d in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#8 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#9 0x00007f06877121d0 in ?? () from /lib/x86_64-linux-gnu/libxfce4panel-2.0.so.4
#10 0x00007f06868ab802 in g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#11 0x00007f06868bf814 in ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#12 0x00007f06868cabbe in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#13 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#14 0x00007f068710fab2 in gtk_widget_activate () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#15 0x00007f0686fdda36 in gtk_menu_shell_activate_item () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#16 0x00007f0686fddcc3 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#17 0x00007f06871625ef in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#18 0x00007f06868aba56 in ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#19 0x00007f06868c9df1 in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#20 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#21 0x00007f068710cc23 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#22 0x00007f0686fc8128 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#23 0x00007f0686fca3db in gtk_main_do_event () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#24 0x00007f0686cb2f79 in ?? () from /lib/x86_64-linux-gnu/libgdk-3.so.0
#25 0x00007f0686ce6106 in ?? () from /lib/x86_64-linux-gnu/libgdk-3.so.0
#26 0x00007f06867c017d in g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#27 0x00007f06867c0400 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#28 0x00007f06867c06f3 in g_main_loop_run () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#29 0x00007f0686fc937d in gtk_main () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#30 0x00005559b75fe9d7 in main ()
```
===================================================================
GDB Backtrace (all threads)
===================================================================
```
[New LWP 1935]
[New LWP 1937]
[New LWP 1936]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `xfce4-panel'.
Program terminated with signal SIGABRT, Aborted.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f0685436a80 (LWP 1935))]
Thread 3 (Thread 0x7f06829df700 (LWP 1936)):
#0 0x00007f0686542aff in __GI___poll (fds=0x5559b7eeb930, nfds=2, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 18446744073709551100
sc_cancel_oldtype = 0
sc_ret = <optimized out>
#1 0x00007f06867c036e in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f06867c04a3 in g_main_context_iteration () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f06867c04f1 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f06867e9ad1 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f06863e3609 in start_thread (arg=<optimized out>) at pthread_create.c:477
ret = <optimized out>
pd = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139665937921792, -4140447336250641593, 140733023937838, 140733023937839, 140733023937984, 139665937919104, 4073268568027919175, 4073261126139474759}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call = 0
#6 0x00007f068654f293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 2 (Thread 0x7f06821b6700 (LWP 1937)):
#0 0x00007f0686542aff in __GI___poll (fds=0x5559b7f005e0, nfds=2, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
resultvar = 1
sc_cancel_oldtype = 0
sc_ret = <optimized out>
#1 0x00007f06867c036e in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#2 0x00007f06867c06f3 in g_main_loop_run () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f0686a15f8a in ?? () from /lib/x86_64-linux-gnu/libgio-2.0.so.0
No symbol table info available.
#4 0x00007f06867e9ad1 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#5 0x00007f06863e3609 in start_thread (arg=<optimized out>) at pthread_create.c:477
ret = <optimized out>
pd = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {139665929365248, -4140447336250641593, 140733023938270, 140733023938271, 140733023938416, 139665929362560, 4073269618684293959, 4073261126139474759}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call = 0
#6 0x00007f068654f293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
No locals.
Thread 1 (Thread 0x7f0685436a80 (LWP 1935)):
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
set = {__val = {0, 18446744073709551615 <repeats 12 times>, 5116406099921243648, 0, 139666001074056}}
pid = <optimized out>
tid = <optimized out>
ret = <optimized out>
#1 0x00007f068645292e in __GI_abort () at abort.c:100
act = {__sigaction_handler = {sa_handler = 0x0, sa_sigaction = 0x0}, sa_mask = {__val = {18446744073709551615 <repeats 16 times>}}, sa_flags = 0, sa_restorer = 0x0}
sigs = {__val = {32, 0 <repeats 15 times>}}
#2 0x00007f068678bb43 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#3 0x00007f06867e8cef in g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#4 0x00007f068770fb7e in ?? () from /lib/x86_64-linux-gnu/libxfce4panel-2.0.so.4
No symbol table info available.
#5 0x00007f06868b0d0e in g_object_unref () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#6 0x00007f06868d64c8 in g_value_unset () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#7 0x00007f06868ca61d in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#8 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#9 0x00007f06877121d0 in ?? () from /lib/x86_64-linux-gnu/libxfce4panel-2.0.so.4
No symbol table info available.
#10 0x00007f06868ab802 in g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#11 0x00007f06868bf814 in ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#12 0x00007f06868cabbe in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#13 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#14 0x00007f068710fab2 in gtk_widget_activate () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#15 0x00007f0686fdda36 in gtk_menu_shell_activate_item () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#16 0x00007f0686fddcc3 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#17 0x00007f06871625ef in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#18 0x00007f06868aba56 in ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#19 0x00007f06868c9df1 in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#20 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
No symbol table info available.
#21 0x00007f068710cc23 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#22 0x00007f0686fc8128 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#23 0x00007f0686fca3db in gtk_main_do_event () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#24 0x00007f0686cb2f79 in ?? () from /lib/x86_64-linux-gnu/libgdk-3.so.0
No symbol table info available.
#25 0x00007f0686ce6106 in ?? () from /lib/x86_64-linux-gnu/libgdk-3.so.0
No symbol table info available.
#26 0x00007f06867c017d in g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#27 0x00007f06867c0400 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#28 0x00007f06867c06f3 in g_main_loop_run () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#29 0x00007f0686fc937d in gtk_main () from /lib/x86_64-linux-gnu/libgtk-3.so.0
No symbol table info available.
#30 0x00005559b75fe9d7 in main ()
No symbol table info available.
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f068645292e in __GI_abort () at abort.c:100
#2 0x00007f068678bb43 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#3 0x00007f06867e8cef in g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#4 0x00007f068770fb7e in ?? () from /lib/x86_64-linux-gnu/libxfce4panel-2.0.so.4
#5 0x00007f06868b0d0e in g_object_unref () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#6 0x00007f06868d64c8 in g_value_unset () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#7 0x00007f06868ca61d in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#8 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#9 0x00007f06877121d0 in ?? () from /lib/x86_64-linux-gnu/libxfce4panel-2.0.so.4
#10 0x00007f06868ab802 in g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#11 0x00007f06868bf814 in ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#12 0x00007f06868cabbe in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#13 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#14 0x00007f068710fab2 in gtk_widget_activate () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#15 0x00007f0686fdda36 in gtk_menu_shell_activate_item () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#16 0x00007f0686fddcc3 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#17 0x00007f06871625ef in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#18 0x00007f06868aba56 in ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#19 0x00007f06868c9df1 in g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#20 0x00007f06868cb0f3 in g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0
#21 0x00007f068710cc23 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#22 0x00007f0686fc8128 in ?? () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#23 0x00007f0686fca3db in gtk_main_do_event () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#24 0x00007f0686cb2f79 in ?? () from /lib/x86_64-linux-gnu/libgdk-3.so.0
#25 0x00007f0686ce6106 in ?? () from /lib/x86_64-linux-gnu/libgdk-3.so.0
#26 0x00007f06867c017d in g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#27 0x00007f06867c0400 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#28 0x00007f06867c06f3 in g_main_loop_run () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#29 0x00007f0686fc937d in gtk_main () from /lib/x86_64-linux-gnu/libgtk-3.so.0
#30 0x00005559b75fe9d7 in main ()
```https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/538Icons sizes are inconsistent when row size is increased and 'Adjust size auto...2022-04-07T18:11:54ZGhost UserIcons sizes are inconsistent when row size is increased and 'Adjust size automatically' is switched on**About Xfce:**
- OS Name: openSUSE Tumbleweed
- OS Type: 64-bit
- Xfce Version: 4.16
- Distributor: openSUSE
**Steps to reproduce bug:**
1. Right click on Panel
2. Panel > Panel Preferences…
3. Change Display tab settings to the follow...**About Xfce:**
- OS Name: openSUSE Tumbleweed
- OS Type: 64-bit
- Xfce Version: 4.16
- Distributor: openSUSE
**Steps to reproduce bug:**
1. Right click on Panel
2. Panel > Panel Preferences…
3. Change Display tab settings to the following:
General -> **Mode** -> Horizontal
Measurements -> **Row size (pixels)** -> 50
![image](/uploads/a65ecf95bf024ad3185a89db01f7c5b2/image.png)
4. Observation: The panel expands vertically, as shown below:
![image](/uploads/23286938ec6efe52c8584f9e92344790/image.png)
5. Change Appearance tab settings to the following:
Icons -> **Adjust size automatically** -> ON
![image](/uploads/8b762885ce199eeb846c647435594e46/image.png)
6. Observation: **Not all icons are resized (in this case enlarged) to adjust to the new size of the panel:**
![image](/uploads/0682af1c6ad9f95b3089f48b597cd957/image.png)
What didn't resize:
- Font ('Menu', 'Downloads', 'Panel Preferences', Clock time)
- Icons for Bluetooth, Wi-Fi, Package Update Indicatorhttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues/593[Clock] Display in the panel2022-07-22T16:54:33ZVasya Pupkin[Clock] Display in the panelThe data does not always fit within the width of its plug-in, perhaps only with Russian. For example Friday 10 June 14:59 (перевод)
![Снимок_экрана_2022-06-10_14-59-38](/uploads/51d1f4e825b15b59b5f2faddbaa96b12/Снимок_экрана_2022-06-1...The data does not always fit within the width of its plug-in, perhaps only with Russian. For example Friday 10 June 14:59 (перевод)
![Снимок_экрана_2022-06-10_14-59-38](/uploads/51d1f4e825b15b59b5f2faddbaa96b12/Снимок_экрана_2022-06-10_14-59-38.png)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/609Workspace switcher ignores rows when in horizontal panel and showing miniatures.2022-09-02T16:38:10Zweiti-jurekWorkspace switcher ignores rows when in horizontal panel and showing miniatures.Debian 11, XFCE 4.16 xfce-panel 4.16.2-1 Intel i5-11400 UHD Grphics 730 with two monitors connected via DP and HDMI.
When I add a workspace switcher to the vertical panel it works perfectly.
But in a horizontal panel only button mode i...Debian 11, XFCE 4.16 xfce-panel 4.16.2-1 Intel i5-11400 UHD Grphics 730 with two monitors connected via DP and HDMI.
When I add a workspace switcher to the vertical panel it works perfectly.
But in a horizontal panel only button mode is usable. In miniature mode all workspaces are stacked vertically in one column. The applet in this situation does not react to setting of the number of rows - it uses as many rows as the number of workspaces always. Width of the applet in this mode seems to be random - sometimes is very wide sometimes drops down so that wokspaces seem to be reproduced proportionaly (although with very small height because stacked in one column).
Horizontal pannel single row set but 8 workspaces stacked in single (unreasonably wide) column - WRONG:
![horizontal](/uploads/4c1b5bd1a68be37988e62200580d816b/horizontal.png)
The same after few changes of the number of rows forth and back - also WRONG:
![narrow1](/uploads/e858d8e9b42c0a24aff3b1a65bf6d029/narrow1.png)
In vertical panel everything is OK:
![vertical](/uploads/986d32f642896c935765d786d3c253ef/vertical.png)
In horizontal panel but with buttons is also OK:
![buttons](/uploads/c12b3b91d9d8b4a8c47f2f5c909d538d/buttons.png)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/632Failed to send D-Bus message2022-10-13T15:58:26ZDilldozer6969Failed to send D-Bus messageGDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.xfce.Panel was not provided by any .service filesGDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.xfce.Panel was not provided by any .service fileshttps://gitlab.xfce.org/xfce/xfce4-panel/-/issues/680Systray crash2023-11-17T12:18:23ZMartin DünkelmannSystray crashSince my upgrade to 4.18 I get the following crash multiple times
```
panel-6-systray[1643]: segfault at 9 ip 00007fe23806ff71 sp 00007ffd7db1a7f0 error 4 in libglib-2.0.so.0.7400.4[7fe238017000+93000] likely on CPU 0 (core 0, socket 0)...Since my upgrade to 4.18 I get the following crash multiple times
```
panel-6-systray[1643]: segfault at 9 ip 00007fe23806ff71 sp 00007ffd7db1a7f0 error 4 in libglib-2.0.so.0.7400.4[7fe238017000+93000] likely on CPU 0 (core 0, socket 0)
Code: 0f 82 43 03 00 00 48 c1 e8 04 4c 8b 75 00 8d 70 ff 49 89 c5 49 89 f7 49 c1 e7 04 4d 01 fe 49 8b 1e 48 85 db 0f 84 c7 01 00 00 <48> 8b 43 08 48 85 c0 0f 84 32 01 00 00 48 8b 10 48 89 53 08 48 89
```
<details>
<summary>Backtrace:</summary>
```
Process 1643 (panel-6-systray) of user 1000 dumped core.
Stack trace of thread 1643:
#0 0x00007fe23806ff71 g_slice_alloc (libglib-2.0.so.0 + 0x75f71)
#1 0x00007fe23807056e g_slice_alloc0 (libglib-2.0.so.0 + 0x7656e)
#2 0x00007fe238c606ff g_type_create_instance (libgobject-2.0.so.0 + 0x3d6ff)
#3 0x00007fe238c47561 n/a (libgobject-2.0.so.0 + 0x24561)
#4 0x00007fe238c48dc0 g_object_new_with_properties (libgobject-2.0.so.0 + 0x25dc0)
#5 0x00007fe238c49bba g_object_new (libgobject-2.0.so.0 + 0x26bba)
#6 0x00007fe2387475e1 n/a (libgtk-3.so.0 + 0x3475e1)
#7 0x00007fe238c60799 g_type_create_instance (libgobject-2.0.so.0 + 0x3d799)
#8 0x00007fe238c47561 n/a (libgobject-2.0.so.0 + 0x24561)
#9 0x00007fe238c49515 g_object_new_valist (libgobject-2.0.so.0 + 0x26515)
#10 0x00007fe238c49b8e g_object_new (libgobject-2.0.so.0 + 0x26b8e)
#11 0x00007fe2385e5a75 n/a (libgtk-3.so.0 + 0x1e5a75)
#12 0x00007fe238c60799 g_type_create_instance (libgobject-2.0.so.0 + 0x3d799)
#13 0x00007fe238c47561 n/a (libgobject-2.0.so.0 + 0x24561)
#14 0x00007fe238c48dc0 g_object_new_with_properties (libgobject-2.0.so.0 + 0x25dc0)
#15 0x00007fe238c49bba g_object_new (libgobject-2.0.so.0 + 0x26bba)
#16 0x00007fe23643615f n/a (libdbusmenu-gtk3.so.4 + 0x815f)
#17 0x00007fe23643b8e5 dbusmenu_gtkclient_newitem_base (libdbusmenu-gtk3.so.4 + 0xd8e5)
#18 0x00007fe23643bbbb n/a (libdbusmenu-gtk3.so.4 + 0xdbbb)
#19 0x00007fe236421b36 n/a (libdbusmenu-glib.so.4 + 0x12b36)
#20 0x00007fe236416520 n/a (libdbusmenu-glib.so.4 + 0x7520)
#21 0x00007fe2381dee04 n/a (libgio-2.0.so.0 + 0xa5e04)
#22 0x00007fe2381e2abd n/a (libgio-2.0.so.0 + 0xa9abd)
#23 0x00007fe238249efe n/a (libgio-2.0.so.0 + 0x110efe)
#24 0x00007fe2381dee04 n/a (libgio-2.0.so.0 + 0xa5e04)
#25 0x00007fe2381e2abd n/a (libgio-2.0.so.0 + 0xa9abd)
#26 0x00007fe238241023 n/a (libgio-2.0.so.0 + 0x108023)
#27 0x00007fe2381dee04 n/a (libgio-2.0.so.0 + 0xa5e04)
#28 0x00007fe2381dee3d n/a (libgio-2.0.so.0 + 0xa5e3d)
#29 0x00007fe23804f87b g_main_context_dispatch (libglib-2.0.so.0 + 0x5587b)
#30 0x00007fe2380a6c89 n/a (libglib-2.0.so.0 + 0xacc89)
#31 0x00007fe23804eddf g_main_loop_run (libglib-2.0.so.0 + 0x54ddf)
#32 0x00007fe2385d8eef gtk_main (libgtk-3.so.0 + 0x1d8eef)
#33 0x000055ea0279a35b main (wrapper-2.0 + 0x335b)
#34 0x00007fe237e36290 n/a (libc.so.6 + 0x23290)
#35 0x00007fe237e3634a __libc_start_main (libc.so.6 + 0x2334a)
#36 0x000055ea0279a4e5 _start (wrapper-2.0 + 0x34e5)
Stack trace of thread 1668:
#0 0x00007fe237f0e0bf __poll (libc.so.6 + 0xfb0bf)
#1 0x00007fe2380a6bef n/a (libglib-2.0.so.0 + 0xacbef)
#2 0x00007fe23804e132 g_main_context_iteration (libglib-2.0.so.0 + 0x54132)
#3 0x00007fe23804e182 n/a (libglib-2.0.so.0 + 0x54182)
#4 0x00007fe23807ce05 n/a (libglib-2.0.so.0 + 0x82e05)
#5 0x00007fe237e998fd n/a (libc.so.6 + 0x868fd)
#6 0x00007fe237f1ba60 n/a (libc.so.6 + 0x108a60)
Stack trace of thread 32238:
#0 0x00007fe237f137fd syscall (libc.so.6 + 0x1007fd)
#1 0x00007fe2380a03a3 g_cond_wait_until (libglib-2.0.so.0 + 0xa63a3)
#2 0x00007fe23801d893 n/a (libglib-2.0.so.0 + 0x23893)
#3 0x00007fe2380826cb n/a (libglib-2.0.so.0 + 0x886cb)
#4 0x00007fe23807ce05 n/a (libglib-2.0.so.0 + 0x82e05)
#5 0x00007fe237e998fd n/a (libc.so.6 + 0x868fd)
#6 0x00007fe237f1ba60 n/a (libc.so.6 + 0x108a60)
Stack trace of thread 1669:
#0 0x00007fe237f0e0bf __poll (libc.so.6 + 0xfb0bf)
#1 0x00007fe2380a6bef n/a (libglib-2.0.so.0 + 0xacbef)
#2 0x00007fe23804eddf g_main_loop_run (libglib-2.0.so.0 + 0x54ddf)
#3 0x00007fe238243adc n/a (libgio-2.0.so.0 + 0x10aadc)
#4 0x00007fe23807ce05 n/a (libglib-2.0.so.0 + 0x82e05)
#5 0x00007fe237e998fd n/a (libc.so.6 + 0x868fd)
#6 0x00007fe237f1ba60 n/a (libc.so.6 + 0x108a60)
ELF object binary architecture: AMD x86-64
```
</details>https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/684Panel 'Launch New Instance' hangs desktop for gvim2023-01-01T15:04:00ZRoel KluinPanel 'Launch New Instance' hangs desktop for gvimWhen I have gvim instances running and right click its icon grouped together on my xfce4 panel and by accident select 'Launch New Instance' this hangs my xfce4 session. The keyboard cursor is first still blinking but disappears after a f...When I have gvim instances running and right click its icon grouped together on my xfce4 panel and by accident select 'Launch New Instance' this hangs my xfce4 session. The keyboard cursor is first still blinking but disappears after a first mouse click. From hereafter there is no visible response to mouse or keyboard actions beside mouse pointer movement. Alt+F4 or Alt-tab or the keys to switch desktops all do nothing.
This launcher bug has been there a while - a few years. I never found anything reported or a solution, so it could be a local config issue.
A crash-landing solution is Ctrl+Alt+F2, and after login:
```
pidof xfce4-session | xargs -r kill -9 && startxfce4
````
BTW, I always run `startxfce4` from the terminal console user login.
When I haven't killed my session yet, I see an App launcher in my `ps aux`, which I suspect, but even a kill -9 just renders it defunct (ps aux), without returning my desktop on Ctrl+Alt+F1. Maybe the underlying cause is that gvim always spawns? The App launcher might get zombified as a process?
There might be a better session saving --reset, but it is not any of these:
```bash
xfwm4 --replace --display=:0.0
xfce4-app-finder --quit --display=:0.0
xfce4-app-finder --replace --display=:0.0
xfce4-panel --restart --display=:0.0
xfce4-panel --quit --display=:0.0
```
Running any of these (except one of the --quit commands) just seem to hang.
There doesn't seem any suspicious logs in my `journalctl -xb` regarding this, (syslog messages since boot).
Distribution is a rolling (reasonably up-to-date) arch-Linux.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/688Panel crashes when Telegram started2023-02-13T17:58:29ZDenis GPanel crashes when Telegram startedHi
I experience strange issue with Xfce4-4.18.0.
xfce4-panel starts and works fine until I try starting Telegram client.
After that panel immediately crashes on segfault.
I tried rebuilding xfce4-panel with debug info (I am under Gento...Hi
I experience strange issue with Xfce4-4.18.0.
xfce4-panel starts and works fine until I try starting Telegram client.
After that panel immediately crashes on segfault.
I tried rebuilding xfce4-panel with debug info (I am under Gentoo).
However, the issue happens only inside 3d-party libs. See below.
```
(wrapper-2.0:1871): Gtk-CRITICAL **: 12:01:02.302: gtk_icon_theme_has_icon: assertion 'icon_name != NULL' failed
(wrapper-2.0:1871): Gtk-CRITICAL **: 12:01:02.352: gtk_icon_theme_has_icon: assertion 'icon_name != NULL' failed
(wrapper-2.0:1871): Gtk-CRITICAL **: 12:01:02.352: gtk_icon_theme_has_icon: assertion 'icon_name != NULL' failed
(wrapper-2.0:1872): GLib-GIO-CRITICAL **: 12:01:02.353: g_file_new_for_path: assertion 'path != NULL' failed
(wrapper-2.0:1872): GLib-GIO-CRITICAL **: 12:01:02.353: g_file_monitor_file: assertion 'G_IS_FILE (file)' failed
(wrapper-2.0:1872): GLib-GObject-WARNING **: 12:01:02.353: invalid (NULL) pointer instance
(wrapper-2.0:1872): GLib-GObject-CRITICAL **: 12:01:02.353: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
(wrapper-2.0:1872): Gtk-WARNING **: 12:01:02.353: Attempting to add a widget with type GtkToggleButton to a container of type XfcePanelPlugin, but the widget is already inside a container of type XfcePanelPlugin, please remove the widget from its existing container first.
** (wrapper-2.0:1870): WARNING **: 12:01:02.357: Binding 'XF86AudioMicMute' failed!
(wrapper-2.0:1870): pulseaudio-plugin-WARNING **: 12:01:02.357: Could not have grabbed volume control keys. Is another volume control application (xfce4-volumed) running?
(wrapper-2.0:1871): Gtk-CRITICAL **: 12:01:02.369: gtk_icon_theme_has_icon: assertion 'icon_name != NULL' failed
(wrapper-2.0:1870): GLib-GObject-CRITICAL **: 12:01:03.467: g_value_get_enum: assertion 'G_VALUE_HOLDS_ENUM (value)' failed
Thread 1 "xfce4-panel" received signal SIGSEGV, Segmentation fault.
0x00007ffff6f2e5d0 in XVisualIDFromVisual () from /usr/lib64/libX11.so.6
(gdb) bt
#0 0x00007ffff6f2e5d0 in XVisualIDFromVisual () at /usr/lib64/libX11.so.6
#1 0x00007ffff7585efa in gdk_x11_window_foreign_new_for_display () at /usr/lib64/libgdk-3.so.0
#2 0x00005555555878ba in panel_window_active_window_geometry_changed ()
#3 0x00007ffff718c6d0 in g_closure_invoke () at /usr/lib64/libgobject-2.0.so.0
#4 0x00007ffff71a19a8 in signal_emit_unlocked_R () at /usr/lib64/libgobject-2.0.so.0
#5 0x00007ffff71ad0ba in g_signal_emit_valist () at /usr/lib64/libgobject-2.0.so.0
#6 0x00007ffff71ad5b7 in g_signal_emit () at /usr/lib64/libgobject-2.0.so.0
#7 0x00007ffff7f0dfd8 in () at /usr/lib64/libwnck-3.so.0
#8 0x00007ffff7f0f7f4 in () at /usr/lib64/libwnck-3.so.0
#9 0x00007ffff709183d in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0
#10 0x00007ffff7091be8 in g_main_context_iterate.isra () at /usr/lib64/libglib-2.0.so.0
#11 0x00007ffff7091ec3 in g_main_loop_run () at /usr/lib64/libglib-2.0.so.0
#12 0x00007ffff783dcdd in gtk_main () at /usr/lib64/libgtk-3.so.0
#13 0x0000555555568ffe in main ()
```https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/735xfce4-panel shows a pile of overlapping pop-ups "unexpectedly left the panel"...2023-04-21T15:07:15ZSebastian Pippingxfce4-panel shows a pile of overlapping pop-ups "unexpectedly left the panel" every other time I log in to XHi! :wave:
I'm a happy user of XFCE, thanks for making XFCE and sharing it as Open Source! :pray:
When I log into X about every second time, xfce4-panel shows a pile of overlapping pop-ups saying "Plugin [..] unexpectedly left the pane...Hi! :wave:
I'm a happy user of XFCE, thanks for making XFCE and sharing it as Open Source! :pray:
When I log into X about every second time, xfce4-panel shows a pile of overlapping pop-ups saying "Plugin [..] unexpectedly left the panel" — screenshot below — that force me to either
- click "Execute" multiple times or
- do "pkill -9 xfce4-panel && xfce4-panel &" on a terminal.
If that could be solved, that would be fantastic.
For potential causes I can think of:
- use of some de-facto dependency before its available,
- use of a non-monotonic clock and NTP/clock updates hitting at the same time, and/or
- some other race condition.
Thanks and best
Sebastian
![xfce_panel_Screenshot_20210821_150914](/uploads/d1523a8280948f93553d0333e9368214/xfce_panel_Screenshot_20210821_150914.png)
PS: This is ticket https://bugs.gentoo.org/810850 in Gentoo Linux if of interest.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/736clipman plugin multiplying icon (XFCE panel rendering/painting issues)2023-04-21T16:53:02ZArtem S. Tashkinovclipman plugin multiplying icon (XFCE panel rendering/painting issues)I've just upgraded from Fedora 37 to 38 and now the clipman plugin icon is multiplying.
To the left of it I have the sensors plugin with two data sources.
Right mouse clicking these redundant icons does nothing, i.e. this is something ...I've just upgraded from Fedora 37 to 38 and now the clipman plugin icon is multiplying.
To the left of it I have the sensors plugin with two data sources.
Right mouse clicking these redundant icons does nothing, i.e. this is something which doesn't belong to either of these two plugins. I've no idea what's going on.
![panel](/uploads/3337e632ecab28acccc60a6b39d02cef/panel.png)
This is a little later:
![panel2](/uploads/fc27f51d76f440cb4f8b784243c28d18/panel2.png)
So, something is rendering something where it shouldn't.
Here's a full list of enabled plugins:
![panel-settings](/uploads/762b8e4c3e9dd992fe5517c9ecca2d65/panel-settings.png)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/751known-legacy-items and names-ordered properties multiplying and never being c...2023-06-05T09:23:54ZArtem S. Tashkinovknown-legacy-items and names-ordered properties multiplying and never being cleaned upWhy??
```XML
<property name="known-legacy-items" type="array">
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" valu...Why??
```XML
<property name="known-legacy-items" type="array">
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="openrgb"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="no network connection"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="bluetooth active <b>1 active connection</b>"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="bluetooth active <b>1 active connection</b>"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="ethernet network connection “wired connection zen realtek l8200a” active vpn connection active"/>
<value type="string" value="bluetooth active <b>1 active connection</b>"/>
<value type="string" value="task manager"/>
<value type="string" value="telegramdesktop"/>
<value type="string" value="clipman"/>
<value type="string" value="bluetooth enabled"/>
<value type="string" value="thunar"/>
<value type="string" value="audacious"/>
<value type="string" value="networkmanager applet"/>
</property>
```https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/753Status Tray icons displayed in wrong size2023-06-12T00:20:59ZVesseStatus Tray icons displayed in wrong sizeThe screenshots show the Panel and Status Tray icon size settings. On the right, you can see the correct size (crow-translate) icon with a blue background. At the top of the Status Tray, you can see the icon as it is as a result.
![Scre...The screenshots show the Panel and Status Tray icon size settings. On the right, you can see the correct size (crow-translate) icon with a blue background. At the top of the Status Tray, you can see the icon as it is as a result.
![Screenshot_2023-06-09_17-14-02](/uploads/70375e2cafe6beeff1118706f64e03a6/Screenshot_2023-06-09_17-14-02.png)
![Screenshot_2023-06-09_17-09-42](/uploads/db0614dc6fe80353fd8697c8c91a31de/Screenshot_2023-06-09_17-09-42.png)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/778English do not change to chinese2023-08-05T08:31:21Z海天鹰English do not change to chinesesudo gedit /etc/environment
```
LANG="zh_CN.UTF-8"
LANGUAGE="zh_CN:zh"
```
![https://s1.ax1x.com/2023/08/03/pPFuwuj.png](https://s1.ax1x.com/2023/08/03/pPFuwuj.png)sudo gedit /etc/environment
```
LANG="zh_CN.UTF-8"
LANGUAGE="zh_CN:zh"
```
![https://s1.ax1x.com/2023/08/03/pPFuwuj.png](https://s1.ax1x.com/2023/08/03/pPFuwuj.png)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/781About - Website - Browser fixed Firefox2023-08-07T16:04:28Z海天鹰About - Website - Browser fixed FirefoxVersion: 4.16.2-1
The default browser had been set to edge, and `exo-open --launch WebBrowser` launch edge too, but all websites of About Dialog in xfce4-panel launch Firefox.Version: 4.16.2-1
The default browser had been set to edge, and `exo-open --launch WebBrowser` launch edge too, but all websites of About Dialog in xfce4-panel launch Firefox.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/801xfce4-panel autohide stops working after a while2023-11-18T19:07:50Znotmikexfce4-panel autohide stops working after a whileVersion: xfce 4.18
Using xfce4-panel, with autohide feature enabled, all will be well at first. The panel hides quickly and completely.
After a while (minutes or hours) the panel stops hiding completely. It appears stuck or slowly 'cree...Version: xfce 4.18
Using xfce4-panel, with autohide feature enabled, all will be well at first. The panel hides quickly and completely.
After a while (minutes or hours) the panel stops hiding completely. It appears stuck or slowly 'creeping' shut.
Running `xfce4-panel -r` returns normal (quick and immediate) autohide, but the problem returns in not too long.
Namaste.https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/811Updating panel elements (e.g. Clock or system monitor plugins) cause lag / st...2024-01-26T12:00:00ZShallrathUpdating panel elements (e.g. Clock or system monitor plugins) cause lag / stutter in video playback and gamesI have the same problem that is described in [this old issue in xfce4-systemload-plugin](https://gitlab.xfce.org/panel-plugins/xfce4-systemload-plugin/-/issues/7): Whenever something in the panel automatically updates itself, be it the s...I have the same problem that is described in [this old issue in xfce4-systemload-plugin](https://gitlab.xfce.org/panel-plugins/xfce4-systemload-plugin/-/issues/7): Whenever something in the panel automatically updates itself, be it the seconds on the clock or one of the system load graphs, I get a small stutter during video playback (YouTube) or games or the unigine-superposition benchmark.
It does not seem to matter if it comes from a built-in feature (displaying seconds on the clock) or a plugin (system monitor). Removing the system monitor plugin from the panel and disabling the seconds on the clock stopped the stuttering. Suspending the processes of the plugins with 'kill -19' also worked, but only on the plugins as the clock doesn't have its own process and I don't want to suspend the whole panel.
This is how it looks like: I let the unigine-superposition benchmark run in game mode (standing still for most constant frame times) and traced the frame times with mangohud. Displaying seconds on the clock has already been disabled but the frametime spikes produced by the clock looked just the same as these:
xfce4-systemload-plugin enabled with update interval 500ms
![Screenshot_2024-01-23_18h36m05s](/uploads/b36d2e2c0682b361e6d076df3c23e955/Screenshot_2024-01-23_18h36m05s.jpg)
xfce4-systemload-plugin removed from the panel:
![Screenshot_2024-01-23_18h35m13s](/uploads/7faf9bff1cf35935e0244c652f545a84/Screenshot_2024-01-23_18h35m13s.jpg)https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/819Nextcloud desktop client always shows symbolic icon in Status Tray2024-03-04T17:46:53ZhaarpNextcloud desktop client always shows symbolic icon in Status TrayHi,
long-time observation here. Some apps such as the [Nextcloud desktop client](https://github.com/nextcloud/desktop) will always show the black/white symbolic icon in panel's Status Tray.
`Request symbolic icons` is disabled in the p...Hi,
long-time observation here. Some apps such as the [Nextcloud desktop client](https://github.com/nextcloud/desktop) will always show the black/white symbolic icon in panel's Status Tray.
`Request symbolic icons` is disabled in the plugin settings. Likewise, `Use monochrome icons` is disabled in Nextcloud.
On other DEs I have seen colored icons, or at least a green checkmark on the white cloud icon. This doesn't seem to show in Xfce panel.
xfce4-panel-4.19.2, nextcloud-client-3.11.1
Thanks!