No automount of large >1TB removable drives
Submitted by Ralf Teres
Assigned to Jannis Pohlmann
Description
Created attachment 5355 Thunar Volman settings are correct
I have a 1TB removable USB drive which is not mounted automatically with thunar-volman. All other removable drives are automatically mounted. Is it possible that thunar-volman recognises large removable drives as internal drives?
It cannot be a problem of the drive itself since udevil/devmon automounts it fine.
thunar-volman 0.8.0-1 thunar 1.6.3-1 gvfs 1.18.3-3 gvfs-afc 1.18.3-3 udisks2 2.1.1-3
Specs of the removable drive:
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD10EAVS-00D7B0
Serial Number: WD-WCAU41164381
Firmware Revision: 01.01A01
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1953525168
Logical/Physical Sector size: 512 bytes
device size with M = 10241024: 953869 MBytes
device size with M = 10001000: 1000204 MBytes (1000 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Read/Write Long (AC1), obsolete
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
232min for SECURITY ERASE UNIT. 232min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee257199a8f
NAA : 5
IEEE OUI : 0014ee
Unique ID : 257199a8f
Checksum: correct
Attachment 5355, "Thunar Volman settings are correct":
Version: 0.8.0